Leave a comment:
Dear Spammers and Trolls: All comments are checked by myself before publishing!
The manual inspection is why it takes some time until your text appears in the comment section (as long as it passes my inspection) - be patient...

I don't answer comments by mail!
Note the rules and my mail address in the column contact!

Norbert

Name:
Comment:
Formular:


----------------------------------------------------

Page: technics-machines-cnc-v3-2-2_en.htm
Date: 2018.07.29 09:52:37 (UTC+1)
Name: your biggest fan

Comment:
thank you so much, you're a great man!

Me: You're welcome!

----------------------------------------------------

Page: technics-machines-cnc-v3-2-2_en.htm
Date: 2018.07.26 07:16:29 (UTC+1)
Name: seamiki

Comment:
Have you tried polishing the acrylic using a flame?
A rough cut edge looks brand new and pretty clear after passing over it with a propane torch.
Maybe can save some elbow grease.
Regards,
Seamiki

Me: Yes, flame polishing would indeed have saved me time and elbow grease and I did not think of that. Thanks for your hint, I'll keep that in mind!

----------------------------------------------------

Page: technics-machines-cnc-v3-2-2_en.htm
Date: 2018.07.21 21:10:18 (UTC+1)
Name: seamiki

Comment:
I guess fresnel lenses are the best suited for this type of manufactoring.

Me: I'd say no, because you still have to polish the surface and that's more triky with all the groves of a Fresnel lens.

----------------------------------------------------

Seite: technics-machines-cnc-v3-2-2_ge.htm
Datum: 2018.06.01 19:51:11 (UTC+1)
Name: christian

Kommentar:
Ist diese Maschine genau so nutzvoll wie CNC_v_3_2_1, oder muss diese Maschine Abstriche machen? Wie sind Sie mit der Präzision zufrieden?

Me: Wie gut die Präzision ist, muss sich noch zeigen. Ich hatte noch keine Gelegenheit, alles zu testen. Das werde ich noch nachholen, wenn das Video zur v3.2.2 erstellt wird. Prinzipiell ist der Stahlrahmen von 3.2.1 ein wenig verwindungssteifer und der verzieht sich garantiert nicht. Schlecht ist der Kasten aus Spanplatten aber keinesfalls.

----------------------------------------------------

Page: technics-machines-cnc-v3-2-2_en.htm
Date: 2018.05.13 18:26:21 (UTC+1)
Name: Rutherford

Comment:
Will the linear guides use ball bearings?

Me: Of course.

----------------------------------------------------

Seite: technics-machines-cnc-v3-2-2_ge.htm
Datum: 2018.05.13 18:05:20 (UTC+1)
Name: Rutherford

Kommentar:
There is the wrong link on the maximized picture.

Me: I have fixed that - thanks!